Need help?Do you have a question about the Solamiser solar panel and is the answer not in the manual?
Power| rated voltage | 240 V a.c. |
|---|---|
| rated current | 16 A rms |
| rated frequency | 50 Hz |
Operating Environment| maximum mains cable current through current clamp | 100 A rms |
|---|---|
| maximum load current | 16 A rms per load |
| maximum ambient temperature | 40 Deg C |
Weight and Dimensions| width | 132 mm |
|---|---|
| height | 68 mm |
| depth | 100 mm |
| weight | 700 g |
Details physical placement and clearance requirements for the Solamiser unit.
Describes how to connect the five-core cable to the Solamiser unit's PCB and enclosure.
Explains the wiring process from the Solamiser to the main consumer unit and immersion heater.
Information on installing an optional switch to bypass the Solamiser for manual heating control.
Details how to plug in and clip the current clamp correctly for accurate energy sensing.
Explains the meaning of the LED when indicating import energy (MODE 1).
Covers export energy (MODE 2) and balanced states, and checking orientation.
Steps to check the energy meter and confirm the Solamiser is correctly commissioned.
Explains the LED pattern indicating the house is consuming energy from the grid.
Explains the LED pattern indicating excess solar energy is sent to the grid.
Describes LED pulses indicating energy diverted to the immersion heater.
Explains double pulses indicating diversion to a second load.
Describes troubleshooting when the LED consistently indicates import energy (MODE 1).
Describes troubleshooting when the LED consistently indicates export energy (MODE 2).
Outlines key technical details including voltage, current, frequency, dimensions, and weight.
To Next Page