What to do if SolarEdge SE K gateway is not responding?
If the SolarEdge Inverter gateway is not responding, check the physical connection to the switch/router and ensure the link LED at the router/switch is lit. If it is, contact your network IT. Otherwise, replace the cable or change it from a cross to a straight connection.
What to do if SolarEdge SE K shows No DHCP?
If the SolarEdge Inverter displays 'No DHCP', check the router and its configuration, or consult your network IT. Alternatively, configure a static IP or set the inverter to DHCP.
Why is SolarEdge Inverter PV string voltage lower than expected?
If the SolarEdge Inverter PV string voltage is not 0V but lower than the number of Power Optimisers, ensure all Power Optimisers are connected. Also, check if the panels are properly connected to the Power Optimiser inputs. Finally, check the PV string polarity using a voltmeter and correct if needed.
General| Topology | Transformerless |
|---|---|
| Communication | Ethernet, RS485 |
| Operating Temperature | -20°C to +60°C |
| Cooling | Natural Convection |
| Warranty | 12 years |
To Next Page
