WARNING!
Do not remove the StorEdge Interface cover before five minutes have elapsed
after disconnecting all sources of power, and shutting OFFthe inverter and the
StorEdge Interface.
WARNING!
Before operating the system, ensure that the power cable and wall outlet have
been grounded properly.
WARNING!
When handling the battery, adhere to all manufacturer safety instructions.
WARNING!
The battery must be powered off before and during wiring.
To power off the battery:
1. Turn off the circuit breaker.
2. Turn off the disconnect/auxiliary power switch.
To power the battery back on:
1. Turn on the disconnect/auxiliary power switch.
2. Turn on the circuit breaker.
For details, see
Powering the LG Chem Battery Off and On
on page 24.
CAUTION!
This unit must be operated under the specified operating conditions as
described in the technical specifications supplied with the unit.
NOTE
The battery used must be NRTL certified.
NOTE
For battery decommissioning and disposal, follow the manufacturer
requirements and instructions.
NOTE
The StorEdge Interface is IP65 rated. Unused connectors and glands should be
sealed with the provided seals.
NOTE
The symbol appears at grounding points on the SolarEdge equipment. This
symbol may also be used in this manual.
HANDLING AND SAFETY INSTRUCTIONS 6
StorEdge Interface Installation Guide MAN-01-00621-1.1
To Next Page
Loading...
