EasyManua.ls Logo

Solartronics FS2000 - Insulation Monitoring

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
E N
N L
4.5 Insulation monitoring
Is this inverter being mounted in a vehicle of any other mobile or movable unit? And is the
110/230VAC going to be used outside the vehicle/unit? Then please pay attention to the
following:
Important
!
If this inverter is used in mobile unities, like mobile workplaces, fire trucks, workmen’s huts
etc, it is usually difficult to get a good and reliable safety connection to earth. However, by law
it is
obligated
to make sure that a person can use an inverter or mobile generator safely. If the
inverter is mounted inside vehicle/unit, and one goes to work outside the vehicle/unit with the
connected 110/230VAC equipment, then it is mandatory to mount an insulation monitoring
device. An RCD (not any type!) will not meet! When an accident occurs because an insulation
monitoring device isn’t mounted in the system, it has serious consequences. In these situations,
always mount an insulation monitoring device from our ISO-series between de inverter and
equipment. For more info, please visit our website www.xenteq.nl. The law applies to all
vehicles/mobile units that are use professionally. Caravans, mobile homes etc. are excluded
from this law, however the circumstances are identical.

Related product manuals