Solartronics FS2000 - Grounding; 4.3 Connection with the equipment

9
E N
N L
Grounding
The AC output ground wire should be connected with the grounding point for the connected
equipment. Also wire the ‘ground’ connection on the inverter with the chassis of the vehicle or
the minus (6mmq wire).
4.3 Connection with the equipment
All inverters from the FS&NK series have a socket for the connection of the 110/230VAC
equipment. The models from 1500Watt have double sockets.
When connecting multiple users it is important that the total load (Watts) and surge powers fall
within the capacity specifications of the inverter.
Important
- If the surge power is exceeded, the inverter will become heavily damaged. Repair costs will
not be covered by warranty.
- Don’t mount the cables against the housing of the inverter.