What to do if SolaX Power Control Unit displays Power Type Fault?
If your SolaX Power Control Unit displays a power type fault, check the version of ARM and DSP. Also, check the product SN number.
Why does my SolaX Power Control Unit show a grid lost fault?
If you're experiencing a grid lost fault with your SolaX Power Control Unit, first check to ensure the mains cable is securely connected. If the cable is not the issue, allow some time for the system to automatically reconnect once the utility power returns to normal.
How to fix a grid voltage out of range error on my SolaX Power X3-PRO G2?
If your SolaX Power Control Unit indicates that the grid voltage is out of range, start by checking the mains cable to ensure it is not loose. If the cable is secure, wait for the system to automatically reconnect once the utility returns to its normal voltage range.
What should I do if my SolaX Power X3-PRO G2 Control Unit has a software overcurrent protection fault?
If your SolaX Power Control Unit displays a software overcurrent protection fault, allow the inverter some time to see if it recovers on its own. If the problem persists, disconnect both the PV and grid connections, and then reconnect them.
What to do about a grid frequency out of range error on a SolaX Power X3-PRO G2?
If your SolaX Power Control Unit displays a grid frequency out of range error, allow some time for the system to automatically reconnect when the utility power returns to its normal frequency.
What to do if SolaX Power Control Unit displays External Fan 2 Abnormal Warning?
If your SolaX Power Control Unit is showing an external fan 2 abnormal warning, check if the fan is working.
How to solve Fan Fault on SolaX Power Control Unit?
If your SolaX Power Control Unit is showing a fan fault, check if the fan is faulty or damaged.
What does External Fan 1 Abnormal Warning mean on SolaX Power X3-PRO G2 Control Unit?
If your SolaX Power Control Unit is showing an external fan 1 abnormal warning, check if the fan is working.
What to do if my SolaX Power X3-PRO G2 reports a meter fault?
If your SolaX Power Control Unit is showing a meter fault, check the meter's connections. Also, verify that the meter is functioning correctly.
Why is my SolaX Power Control Unit showing an over temperature fault?
If your SolaX Power Control Unit is displaying an over temperature fault, check to see if the inverter or the surrounding ambient temperature is exceeding the specified operating range.
General| THDi | <3% |
|---|---|
| Number of MPPTs | 2 |
| DC Switch | Integrated |
| Nominal Output Voltage | 230 V |
| Output Frequency | 50 Hz / 60 Hz |
| Power Factor | >0.99 |
| Communication | WiFi / Ethernet / GPRS (Optional) |
| Protection | AC Short-Circuit Protection |
| Operating Temperature Range | -25°C to +60°C |
| Warranty | 10 years |
| Humidity | 0~100% |
To Next Page