8. Decommissioning
8.1 Dismantling the Inverter
Disconnect the inverter from DC Input and AC output.
Wait for 5 minutes for de-energizing.
Disconnect communication and optional connection wirings.
Remove the inverter from the bracket.
Remove the bracket if necessary.
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent carton that meets
the following requirements.
Suitable for loads more than 30 kg.
With handle.
Can be fully closed.
8.3 Storage and Transportation
Store the inverter in dry place where ambient temperatures are always
between -25°C - +60°C. Take care of the inverter during the storage and
transportation,keep less than 4 cartons in one stack.
8.2 Packaging
When the inverter or other related components need to be disposed. Have
it carried out according to local waste handling regulations. Please be sure
to deliver wasted inverters and packing materials to certain site, where can
assist relevant department to dispose and recycle.
44
Decommissioning
To Previous Page
Loading...
Need help?
General
