To Next PageTo Next Page
Need help?Do you have a question about the Solax X1-Hybrid Series and is the answer not in the manual?
General| Type | Hybrid Inverter |
|---|---|
| Number of MPPTs | 2 |
| Protection Rating | IP65 |
| Frequency Range | 50Hz/60Hz |
| Cooling Method | Natural Convection |
| Model | X1-Hybrid Series |
| Battery Voltage Range | 40 V - 60 V |
| Max Charging Power | 3.0 kW |
| Max Discharging Power | 3.0 kW |
| Communication | WiFi |
| Operating Temperature Range | -25°C ~ +60°C |
Describes the manual's purpose, scope, and applicability to X1-Hybrid inverters.
Identifies the intended audience as qualified electricians for safe operation.
Explains safety and information symbols used throughout the document for clarity.
Crucial safety directives for installation and operation, covering high voltage and general warnings.
Covers surge protection devices (SPDs), PE connection, and leakage current safety measures.
Details inverter symbols and lists relevant European directives for compliance.
Describes the inverter's core capabilities, functions, and dual EPS versions.
Explains various operational modes like Self-use, Back up, Force time use, and Feed in Priority.
Provides physical dimensions and layout of the inverter for installation planning.
Identifies and describes the various connection terminals on the inverter.
Lists DC input specifications and limitations for different inverter models.
Details AC output/input parameters and internal charger specifications.
Lists efficiency ratings, EPS output specs, and general data like dimensions and temperature.
Instructions for inspecting the unit upon arrival for any visible damage.
Lists all included accessories and components provided in the package.
Covers installation precautions and guidelines for mounting the inverter on a wall.
Specifies required clearance around the inverter for proper ventilation.
Detailed, step-by-step instructions for physically mounting the inverter.
Details how to connect PV modules, including warnings and configuration notes.
Explains how to connect the inverter to the grid, including wiring recommendations.
Describes connecting for EPS functionality, covering version differences and modes.
Detailed steps for making the EPS wiring connections.
Discusses load requirements and warnings for EPS mode operation.
Covers battery breaker, connection diagram, and BMS PIN definition.
Steps for connecting communication cables between devices.
Explains essential grounding procedures to prevent electric shock.
How to connect meters or current transformers for monitoring power usage.
Details how to connect a current transformer for monitoring.
Describes how to connect the inverter via LAN for network monitoring.
How to connect for Demand Response Modes (DRM) as per grid standards.
How to connect the inverter via WiFi for remote monitoring.
Steps for starting the inverter after all connections are made.
Steps to check inverter status, indicators, and connections before operation.
Prerequisites for firmware upgrade, including U-disk requirements and power.
Detailed steps to upgrade the inverter's firmware using a U-disk.
Describes the inverter's control panel components and their functions.
Overview of the inverter's menu system and navigation paths.
How to use the LCD display and navigate through menus.
Details the different status screens for Grid, Solar, Charger, and EPS.
Explains how to view historical data like Inverter Yield, EPS Yield, Meter Yield, and Error Logs.
General overview of setting categories available for the inverter.
How to set the system date and time on the inverter.
How to select the display language for the inverter interface.
Ethernet connection settings, including IP addressing and configuration.
Configuration of different inverter operational modes based on user needs.
Description of the optional relay control function for load management.
Access to advanced settings requiring installer password for configuration.
Setting safety standards for different countries and grid compliance.
Configuration of power factor modes for grid requirements and compliance.
Grid parameter settings, including voltage and frequency protection.
Setting limits for exporting power to the grid.
Covers GlblMPPTFunc, Remote Control, P(u) Function, and DRM Function settings.
Details how to perform self-tests on the inverter for diagnostics.
Charger parameter settings, including capacity and current limits.
EPS system settings, including mute and frequency options.
Resets the inverter's energy generation records.
Resets all recorded inverter error logs.
Resets the meter's energy records.
Resets inverter manager parameter records.
Replays the initial setting guide for setup assistance.
Settings for CT/Meter interface configuration.
Allows the user to set a new password for security.
Controls the overall operational status of the inverter (ON/OFF).
Displays general information about the inverter, such as serial numbers.
Guides on identifying and resolving common inverter faults and issues.
Instructions for periodic inspection, cleaning, and maintenance of the inverter.
Covers inverter removal, packaging, storage, and transportation procedures.
