Introduction Introduction
12
13
3.2 Work Modes
Work modes: Self-use (without PV Power)
When no PV supplied, battery will discharge
for local loads firstly, and grid will supply
power when the battery capacity is not
enough.
EPS Status
When the grid is off, system will supply
emergency power from PV or battery to
supply the home loads. (Battery is necessary
in EPS mode.)
X1-Hybrid Series inverter provides multiple work modes based on different
requirements.
Work modes: Feed in Priority
Priority:load>grid>battery
This mode applies the area that has high feed-
in tariff and export control.
The PV generated power will be used to
supply the local loads firstly, then export to the
public grid. The redundant power will charge
the battery.
Work modes: Back up mode
Priority:battery>load>grid
This mode applies the area that has frequent
power outages. And this mode ensures the
battery will has enough energy to supply
when the grid is off.
In this mode battery will be charging forcibly
in the setting time and will never be
discharged when the grid is on, and it also
allows to choose whether charge from the
grid or not.
Work modes: Self-use (with PV Power)
Priority: load>battery>grid
This mode applies the area that has low feed-
in tariff and high energy price.
Work modes: Force time use
Priority:battery>load>grid(when charging)
Priority:load>battery>grid(when discharging)
This mode applies the area that has electricity
price between peak and valley. User can use
off-peak electricity to charge the battery.
The power generated from PV will be used to
supply the local loads firstly, then to charge
the battery. The redundant power will export
to the public grid.
The charging and discharging time can be set
flexibly, and it also allows to choose whether
charge from the grid or not.
3.3 Dimension
464.0mm
476.0 mm
180.0 mm
To Next Page
Loading...
Need help?
General
