SOLE SB700 - Handlebar Installation

|
#49. 5/16" Split
Washer (4 pcs)
#48. 5/16"x 16mm
Flat Washer (4 pcs)
#88. 5/16"x lSmm
Screw (4 pcs)
Attach the handlebars (make sure they are oriented as in the illustration) with
four Screws (88), four Split Washers (49), and four Flat Washers (48). Tighten
firmly using the Combination M5 Allen Wrench & Phillips Head Screw Driver
(86).
SBTO0 INDOOR CYCLE 8