_EFT/RIGHTPEDALS
/
25(R) /
/
/°
\\
/ \\
25(L) /
1.
Attach the Right and Left pedals to the appropriate crank. The pedals have an
"R" and an "L" stamped on the end of the threaded area to distinguish them.
Check the illustrations to make sure you are attaching each to the correct
side. Note: the left side has left hand threads; therefore you will screw it on
in a counterclockwise direction. Tighten each pedal as firmly as possible
with the Wrench (85) provided. If you here a thumping sound when you are
pedaling, this usually means one or both pedals are loose.You may need to
retighten them after use.
9 SB700 INDOOR CYCLE
To Next Page
Loading...
