28
s
CLEANING AND MAINTENANCE
ATTENTION: Every time before cleaning, switch off the appliance, disconnect the
mains plug from the power outlet and let the appliance cool down.
Do not use abrasive or aggressive cleaning agents, rough sponges or cloths as they
might scratch the surface.
ATTENTION: Never immerse the espresso machine casing, the power cord or the
power plug in water or other liquids or allow the parts to come into contact with
them!
NOTE: The espresso machine parts and accessories are not dishwasher safe.
■
CLEANING THE FILTER AND THE PORTAFILTER
●
Use the small needle of the cleaning tool to clean the hole of the dual wall filters.
The pin is not intended for the single wall filters.
●
Up to under the handle of the portafilter, place the dirty portafilter and the filter
in a container with mild detergent and hot water.
■
CLEANING THE STEAMING NOZZLE OF THE STEAM / HOT
WATER WAND
●
Unscrew the steam nozzle from the steam / hot water wand. Rinse the steam
nozzle carefully in warm water and then re-rinse it with clear water.
●
Should the nozzle be blocked, insert the big needle of the cleaning tool into the
opening of the nozzle. If the nozzle still is clogged, first place the nozzle in a glass
of hot water, then use the needle again to remove the blockage.
●
Screw the nozzle back onto the steam/hot water wand.
■
CLEANING THE CASING, THE CUP TRAY
AND THE WATER TANK
Clean the casing, the cup tray and the water tank with a soft, slightly moist cloth,
then dry it with a dry cloth.
■
CLEANING THE DRIP TRAY WITH DRIP GRID
●
Remove, empty and clean the drip tray with the drip grid at regular intervals but
every time it is full and the red float gauge is visible between the drip grid.
U
To Next Page
Loading...
