76
INSERTING THE PORTAFILTER
– Before inserting the portafilter, press the
or button so that water runs
out of the group head and washes out any coffee residues from the brewing
group. This will also stabilise temperature before extraction.
– Place the portafilter under the group head so that the handle is placed directly
underneath the inscription INSERT.
– Push up the portafilter against the group head and turn the handle to the right
until you feel slight resistance and the handle is at the LOCK position. The handle
should now be at a 90 ° angle to the machine.
Place one or two cups on the drip tray underneath the portafilter spouts.
When all button surrounds are lit continuously, the machine has reached its oper-
ating temperature and you are ready to brew coffee.
Downloaded from www.vandenborre.be
To Next Page
Loading...
