169
E
CARE AND CLEANING
CLEANING THE STEAM WAND
• Steam wand has to be cleaned every time after
steaming.
• Position the steam wand over the drip tray and
briefly turn the dial to the steam symbol. This
will remove milk residues from the nozzle.
• Wipe the steam wand with a damp cloth after
each use.
• Ensure the steam dial is in the STANDBY
position. Press the POWER button to off and
allow the machine to cool.
• If the steam wand remains blocked, use the
pin on the cleaning tool to clear the opening.
• If the steam wand continues to be blocked,
the tip of the steam wand can be removed by
using the fitting in the middle of the cleaning
tool.
• Unscrew the top with the cleaning tool.
• Soak the tip in hot water before using the pin
on the cleaning tool to unblock. Replace the
tip back onto the steam wand and secure with
the cleaning tool.
Steam Wand
Maintenance
Clogged
Steam Wand?
Clean hole with pinWipe steam wand
with damp cloth after
each use
Run steam to clear
milk from wand after
texturing
Remove tip Soak tip in hot
water
To Next Page
Loading...
Need help?
General
