Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is
to work normally in the environmental conditions covered by the following points.
Environmental conditions other than those described may cause mechanical
breakage resulting in the creation of dangerous situations for persons.
A
LTITUDE
The altitude of the place in which the machine is to be used must not exceed 1500
m above sea level.
T
EMPERATURE
Minimum ambient temperature: -5°C
Maximum ambient temperature: +50°C
A
TMOSPHERIC CONDITIONS
The electrical equipment will function correctly in atmospheric conditions with a
relative humidity up to 50% at a temperature of 40°C and at 90% with a tempera-
ture up to 20°C (without condensate).
A
TMOSPHERE WITH RISK OF EXPLOSION AND/OR FIRE
The standard machine herein described is not designed to work in explosive at-
mospheres or in those with risk of fire.
4. LIFTING AND TRANSPORTATION
All material is carefully checked by the manufacturer before shipping. The flail
mower is delivered in a wooden crate or cardboard box with the handlebars and
front support with wheels disassembled.
Upon receipt of the machine make sure that it has not been damaged during tran-
sit and that the packaging has not been tampered or any parts removed. Report
any damage or missing parts immediately to the driver and the manufacturer with
photographic documentation.
After assembling the handlebars, the front support with wheels and the safety bar
as per the instructions given in paragraph 7 of this manual, the machine may be
moved on its own wheels.
The manufacturer is not liable for any damage caused by transportation of the
machine after its delivery.
WARNING
Extreme care must be taken during handling to prevent overturning. Avoid steep
gradients to prevent loss of control.
Make sure that there are no persons present within the danger area.
To Next Page
Loading...
