16 17
Technical Specifications
INDICATION PROBLEM SOLUTION
E30 Door is not closed properly
• Restart after the door is closed
• Check if there are clothes or washing articles stuck
E10
Water injecting problem
while washing
• Check if the water pressure is too low
• Straighten the water pipe
• Check if the inlet valve lter is blocked
E21 Overtime water draining • Check if the drain hose is blocked
E12 Water overow • Restart the washer
Note: If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/O” button.
• Switch o the appliance at the power outlet and remove the plug.
• Call our customer service team.
Below outlines the technical specications for your Washing Machine.
Washing Capacity 6.0kg
Dimensions (W � D � H mm) 595 � 495 � 850 mm
Net Weight 60kg
Rated Power 2050W
Power Supply 220-240V, ~50Hz, 10Amp
Standard Water Pressure 0.05MPa~1.0MPa
Max Noise Level (Washing/Spinning) 60dbA / 79dbA
NOTE:
This product is subject to continuous improvement, specication are subject to change without prior notice.
This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: "Cotton Eco 60", which is
the program recommended for a normally soiled cotton load at rated capacity.
Attach your receipt
to this page
Troubleshooting (Continued)
For future reference, please record the following information which can be found on the rating plate and the date of
purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|
Purchase Details
To Next Page
Loading...
Need help?
General
