Solt GGSRCG900S User Manual (English)

Other manuals for Solt GGSRCG900S

Questions and Answers:

L
lopezjerryAug 5, 2025
Why is there insufficient suction power in my Solt GGSRCG900S Ventilation Hood?
- K
  Kathryn MorrisonAug 6, 2025
  If your Solt Ventilation Hood experiences insufficient suction or inadequate air extraction, it could be due to the distance between the rangehood and the cooktop being too great. Try re-adjusting the installation position, ensuring you observe the minimum distances. Also, check that your rangehood has been ducted correctly according to the installation instructions, as loose or kinked ducting, or ducting that is too long or has too many bends, can cause this issue.
L
laurarodriguezAug 10, 2025
What to do if my Solt GGSRCG900S is vibrating?
- J
  jason36Aug 10, 2025
  If your Solt Ventilation Hood is vibrating against the wall or cabinetry, make sure the body is fixed tightly and that all installation steps were completed correctly. Also, ensure that the motor is locked in tightly. If the fan blade is damaged, call our After Sales Support Team for assistance.
K
kevincarterAug 15, 2025
Why is oil leaking from my Solt GGSRCG900S Ventilation Hood?
- P
  peter96Aug 15, 2025
  If oil is leaking from your Solt Ventilation Hood, it could be due to the outlet and air ventilation entrance not being tightly sealed. Carefully take down the outlet and re-seal it with glue. Alternatively, leakage from the connection of the U-shaped section and cover could be the cause. Take the U-shaped section down and seal it with soap or paint.
N
Nancy GarciaAug 20, 2025
What to do if both the light and motor of my Solt Ventilation Hood don't work?
- J
  Jessica HolmesAug 20, 2025
  If both the light and motor of your Solt Ventilation Hood aren't working properly, the fuse or light may be damaged; in this case, reset or replace the fuse or light. Another potential cause is a loose or disconnected power supply cord, so reconnect the power supply to the wall socket.
R
Rodney HumphreyAug 26, 2025
How to fix an inclining Solt GGSRCG900S Ventilation Hood?
- K
  kellymcmahonAug 26, 2025
  If your Solt Ventilation Hood is inclining, it is likely that the fixing or hanging screws are loose. Tighten these screws to resolve the issue.
M
Margaret BellAug 31, 2025
Why does the motor of my Solt Ventilation Hood not work, but the lights do?
- R
  Rebecca ReynoldsAug 31, 2025
  If the lights on your Solt Ventilation Hood can be turned on but the motor does not work, the fan switch, the motor, or the capacitor may be damaged, or the blades may be blocked. Call our After Sales Support Team for further guidance.