Solt GGSRCG900S - User Manual

Other manuals for Solt GGSRCG900S

Quick Start Guide2 pages

Questions and Answers

L
lopezjerryAug 5, 2025
Why is there insufficient suction power in my Solt GGSRCG900S Ventilation Hood?
- K
  Kathryn MorrisonAug 6, 2025
  If your Solt Ventilation Hood experiences insufficient suction or inadequate air extraction, it could be due to the distance between the rangehood and the cooktop being too great. Try re-adjusting the installation position, ensuring you observe the minimum distances. Also, check that your rangehood has been ducted correctly according to the installation instructions, as loose or kinked ducting, or ducting that is too long or has too many bends, can cause this issue.
L
laurarodriguezAug 10, 2025
What to do if my Solt GGSRCG900S is vibrating?
- J
  jason36Aug 10, 2025
  If your Solt Ventilation Hood is vibrating against the wall or cabinetry, make sure the body is fixed tightly and that all installation steps were completed correctly. Also, ensure that the motor is locked in tightly. If the fan blade is damaged, call our After Sales Support Team for assistance.
K
kevincarterAug 15, 2025
Why is oil leaking from my Solt GGSRCG900S Ventilation Hood?
- P
  peter96Aug 15, 2025
  If oil is leaking from your Solt Ventilation Hood, it could be due to the outlet and air ventilation entrance not being tightly sealed. Carefully take down the outlet and re-seal it with glue. Alternatively, leakage from the connection of the U-shaped section and cover could be the cause. Take the U-shaped section down and seal it with soap or paint.
N
Nancy GarciaAug 20, 2025
What to do if both the light and motor of my Solt Ventilation Hood don't work?
- J
  Jessica HolmesAug 20, 2025
  If both the light and motor of your Solt Ventilation Hood aren't working properly, the fuse or light may be damaged; in this case, reset or replace the fuse or light. Another potential cause is a loose or disconnected power supply cord, so reconnect the power supply to the wall socket.
R
Rodney HumphreyAug 26, 2025
How to fix an inclining Solt GGSRCG900S Ventilation Hood?
- K
  kellymcmahonAug 26, 2025
  If your Solt Ventilation Hood is inclining, it is likely that the fixing or hanging screws are loose. Tighten these screws to resolve the issue.
M
Margaret BellAug 31, 2025
Why does the motor of my Solt Ventilation Hood not work, but the lights do?
- R
  Rebecca ReynoldsAug 31, 2025
  If the lights on your Solt Ventilation Hood can be turned on but the motor does not work, the fan switch, the motor, or the capacitor may be damaged, or the blades may be blocked. Call our After Sales Support Team for further guidance.

Summary

Safety Information

Conditions of Use and Pre-Installation Safety

Intended use in household applications and safety precautions before installation and maintenance.

Operational Safety Guidelines

Safety precautions during operation, child safety, and fire risks.

Exhaust Flue Installation

Optimal Extraction Rules

Rules for short, straight, and correctly sized exhaust flues for optimal performance.

Ventilation and Recirculation Requirements

Discusses room ventilation needs and recirculation mode.

Disposal

Environmental Compliance and Disassembly

WEEE directive compliance, environmental disposal, and disassembly.

Your Rangehood

Component Identification

Identifies key parts of the rangehood, including the control panel and filters.

Included Accessories and Tools

Lists all included accessories and required tools for installation.

Operation Instructions

Control Panel Functions Explained

Details the operation of the control panel buttons for fan speed and lights.

Installation Instructions

Installation Safety Precautions

Safety guidelines before and during installation, including electrical safety.

Ducted Installation Recommendations

Best practices for ducted installation, ducting types, and materials.

Positioning the Rangehood

Mounting Height Specifications

Specifies minimum and maximum height requirements from cooktop to rangehood.

Installation Guide

Step-by-Step Mounting Process

Detailed steps for mounting the wall bracket, chimney, and securing the rangehood.

Cleaning & Maintenance

Cleaning Your Rangehood Tasks

Tasks and frequency for cleaning exterior, controls, and grease filters.

Cleaning Safety Precautions

Important safety rules to follow during cleaning and maintenance.

Cleaning the Grease Filters

Filter Cleaning Methods

Instructions for cleaning grease filters by hand or in a dishwasher.

Replacing Components

Carbon Filter Replacement

Guidance on replacing optional carbon filters every 2-3 months.

Light Bulb Replacement

Instructions for replacing light bulbs, requiring a qualified technician.

Troubleshooting

Minor Faults and Solutions

Table detailing common minor problems and their solutions.

Serious Faults and Contact

Advice for serious faults and contacting the support team.

Technical Specifications

Product Specifications Details

Lists model, finish, extraction, speed, filters, lighting, noise, power, dimensions, and weight.

Purchase Details

Recording Purchase Information

Space to record store and product details for future reference.

Warranty Information

Warranty Terms and Conditions

Defines terms like 'acceptable quality', 'ACL', 'Appliance', and 'Warranty Period'.

Warranty Coverage and Exclusions

Details warranty application in Australia, repair/replacement clauses, and exclusions.

Making a Warranty Claim

Claim Process and Liability

Explains claim process, causes for damage, and exclusions from warranty.

Contacting Support for Claims

Provides contact details for making warranty claims and seeking service.

This document is the user manual for the Sôlt GGSRCG900S 90cm Curved Glass Canopy Rangehood. It provides comprehensive information on the rangehood's installation, operation, maintenance, and safety.

Function Description:

The Sôlt GGSRCG900S is a 90cm curved glass canopy rangehood designed for household and similar applications. Its primary function is to extract cooking fumes, steam, and odors from the kitchen environment, ensuring adequate ventilation. It can operate in either ducted or recirculation mode, although ducted installation is recommended for maximum performance. The rangehood features a control panel for adjusting fan speeds and lighting, and it uses aluminum grease filters to capture grease particles. For recirculation mode, optional carbon filters can be installed to remove odors.

Important Technical Specifications:

Model: GGSRCG900S
Finish: Stainless Steel with Glass Hood
Extraction: 750m³/hr
Speed Settings: 3 (Low, Medium, High)
Aluminum Filter: 2 × Aluminum Grease Filters
Carbon Filters: Optional accessory (for recirculation mode)
Lighting: 2 × 0.5W LED
Max. Noise Rating: 72 dB(A)
Power Supply: 220-240V~, 50-60Hz
Product Dimensions (W x D x H): 895 × 500 × 570-1060mm
Product Weight: 16.24kg
Ducting Diameter: Ø 150mm (recommended for optimum airflow)
Minimum Installation Height: 650mm from cooktop surface (for electric cooktops), 650mm (for gas cooktops with max 45.4 MJ/h total output and no single burner exceeding 16.2 MJ/h), 760mm (for gas cooktops with max 45.4 MJ/h total output and no single burner exceeding 17.3 MJ/h), 650mm (for single gas burner not exceeding 21.6 MJ/h), 760mm (for single gas burner greater than 21.6 MJ/h but not exceeding 29.2 MJ/h).
Maximum Installation Height: 850mm from cooktop surface.

Usage Features:

The rangehood is equipped with a user-friendly control panel that allows for easy operation.

Power Off: A dedicated button to turn the rangehood fan off.
Low Speed: Ideal for simmering and cooking with minimal steam.
Medium Speed: Suitable for regular cooking tasks.
High Speed: Provides maximum extraction efficiency for heavy smoke or steam.
Light: A button to switch the LED lights on and off, illuminating the cooking area. The manual emphasizes the importance of proper installation, including maintaining the correct distance from the cooktop and ensuring adequate room ventilation, especially when used simultaneously with gas or other fuel-burning appliances. It also advises against operating more than four cooktop burners at the same time and never flambéing under the rangehood.

Maintenance Features:

Regular cleaning and maintenance are crucial for the rangehood's optimal performance and longevity.

Exterior Surface Cleaning: Recommended weekly using a soft cloth dampened with lukewarm water and a compatible cleaning solution. A soft cloth is essential to prevent scratches.
Controls Cleaning: Recommended weekly with a clean, soft cloth and a cotton swab, using a compatible cleaning solution with care.
Grease Filter Cleaning: Recommended monthly. Filters can be soaked in warm water (max 30°C) with a mild, non-corrosive grease-removing detergent, or washed in a dishwasher (max 30°C program, without rinse aids, and separately from other crockery). Filters should be brushed gently and allowed to air dry away from direct sunlight.
Carbon Filter Replacement: Recommended every 2-3 months if the rangehood is used in recirculation mode. Carbon filters are optional accessories and should not be cleaned or washed; they must be replaced. The manual provides instructions for installing and replacing them by slotting and turning clockwise.
Light Bulb Replacement: Should be performed by a qualified electrician or authorized service agent. Users are cautioned not to touch the lights for 30 minutes after use as they can be hot. The manual stresses the importance of disconnecting the appliance from the electricity supply before any cleaning or maintenance. It also warns against using acrid, corrosive, or abrasive detergents, wipes, chemicals, alcohol, or steam cleaners, as these can damage the surface or electrical components. Water must not enter electrical parts to avoid electric shock. Regular inspection for visible damage, strong odors, or overheating is advised, with instructions to contact customer support if such issues arise.