Solt GGSRCG900S - Your Rangehood; Component Identification; Included Accessories and Tools

To Next Page

To Previous Page

GGSRCG900S

Your Rangehood

GGSRCG900S

Tools Required for Installation

• Ducting relevant to your installation requirements,

including any rigid bends, vents or adapters

• Duct Tape or Cable Ties

• Drill and Screwdriver

• Spirit Level and Tape Measure

• Jigsaw, Ladder and Pencil

Included Accessories

• 1 × Rangehood, User Manual & Quick Start Guide

• 1 × Expandable Ø 150mm Pipe

• 1 × One-Way Valve (2 pieces)

• 1 × Packet of Screws & Wall Plugs

• 2 × Flue Pieces (Upper & Lower)

• Wall, Inside & Outside Chimney Brackets

Rangehood Key

1. Control Panel

2. Aluminium Grease Filters

Other manuals for Solt GGSRCG900S