What to do if both the light and motor on my Solt GGSRUM520S don't work?
If both the light and motor of your Solt Ventilation Hood aren't working, the fuse or light might be damaged, in which case you should reset or replace the fuse or light. Alternatively, the power supply cord may be loose or disconnected. Ensure that you reconnect the power supply to the wall socket.
Why does my Solt GGSRUM520S have insufficient suction power?
If your Solt Ventilation Hood has insufficient suction power, it could be due to a few reasons. The distance between the rangehood and the cooktop may be too great, so readjust the installation position, ensuring that the minimum distances are observed. Also, ducting may be loose, kinked, be too long or have too many bends. Check that your rangehood has been ducted correctly and in accordance with the installation instructions.
Why is my Solt GGSRUM520S vibrating so much?
If your Solt Ventilation Hood is vibrating, it might not be fixed correctly, so ensure that the body is tightly secured and that all installation steps were followed correctly. Another cause may be that the motor is not tightly hung, so lock the motor in tightly.
How to fix an oil leak in my Solt Ventilation Hood?
If oil is leaking from your Solt Ventilation Hood, the outlet and air ventilation entrance might not be tightly sealed, so carefully take down the outlet and re-seal it with glue. Also, there could be leakage from the connection of the U-shaped section and cover; in this case, take the U-shaped section down and seal with soap or paint.
What causes my Solt GGSRUM520S Ventilation Hood to incline and how do I fix it?
If your Solt Ventilation Hood inclines, it's likely that the fixing or hanging screws are loose. Tighten these screws to secure the rangehood.
General| Brand | Solt |
|---|---|
| Model | GGSRUM520S |
| Material | Stainless Steel |
| Width | 520 mm |
| Number of Motors | 1 |
| Lighting | LED |
| Number of Speed Settings | 3 |
| Filter Type | Aluminium |
Explains the function of each button on the control panel for operation.
Details on how to install the rangehood using ducting to the outside.
Instructions for operating the rangehood in recirculation mode without external ducting.
Step-by-step guide for installing the rangehood into a cabinet.
Safety advice to follow when cleaning the appliance to prevent damage or electric shock.
Addresses common minor issues like lights not working or insufficient suction.
Guidance for serious problems and how to contact customer support.
Details the terms and conditions of the product warranty and exclusions.
To Next Page
