Solution 3 Series - Scope of Delivery; Rear Side

soulution
nature of sound
Page 6
3 Scope of delivery
ð 311 stereo amplifier
ð IR-remote control
ð Power cord
ð Link-Com cable
ð User manual
4 Rear side
Mains (A)
Depending on the PWR-MODE settings the 311 will change to operating condition
OFF (consumption < 0.5W), wait for the Link-Com signal (operating. condition OFF)
or switch-on automatically when connected with the mains.
Ensure the 311 is OFF
condition
b
efore disconnecting
it
from the mains
.
Input (B)
Use high grade balanced cables for the connection to your preamplifier. In case of
hum-noise due to ground loops you may activate the ground-lift.
Speaker (C)
Due to its exceptional load stability and peak current capacities the 311 stereo am-
plifier can easily drive any loudspeaker.