Stereo amplifier 311
User manual
Page 7
Link-Com (D)
The Link Com can remote control the power-up/down sequence of connected soulu-
tion series3 components.
Firmware (E)
The firmware can be updated through the USB interface.
ð
Disconnect the unit from the mains
ð
Copy the new firmware file on a USB stick, no other files on the stick
ð
Plug the USB stick in the “Firmware” interface
ð
Connect the unit with the mains
ð
Follow the instructions in the display
5 Front side
Power (F)
The power buttons toggles between ON and OFF (red LEDs in display). We suggest
switching the 311 to OFF whenever you do not listen to music.
Display / IR-receiver (G)
The display shows all relevant information.
To Next Page
Loading...