Somerset CDR-2000 - User Manual

CDR-2000 & CDR-1550
Front Operated Dough Roller
OPERATIONS MANUAL
SOMERSET INDUSTRIES
1-3 ESQUI RE RD. • N. BI LLERI CA, MA 01862 • USA • 978-667-3355
Email: somerset@smrset.com
Web: www.smrset.com
WARNING!!! DO NOT CLEAN OR SERVICE THE MACHINE WITHOUT
PRESSING THE RED BUTTON AND UNPLUGGING THE ELECTRICAL CORD
FROM THE POWER SUPPLY. KEEP YOUR FINGERS AND HANDS FROM THE
ROLLER AREA WHEN OPERATING OR SERVICING THE MACHINE. DO NOT
OPERATE THE MACHINE WITHOUT THE GUARDS IN PLACE. IF THE
MACHINE KEEPS RUNNING WITH SAFETY GUARDS REMOVED,
IMMEDIETLY PRESS THE STOP BUTTON AND REMOVE THE PLUG FROM
THE POWER SOURCE. CALL THE FACTORY OR A QUALIFIED SERVICE
REPRESENTATIVE. DO NOT ATTEMPT TO OPERATE THE MACHINE UNTIL
PERMITTED BY THE SERVICE TECHNICIAN.

Summary

MACHINE INSTALLATION

MACHINE SET UP

Adjusting roller gap for final product thickness using dial settings and handles.

DOUGH PREPARATION

OPERATING PROCEDURE

Procedures for preparing dough and using the machine.

OPERATION

Visual guide to feeding dough through the rollers.

CLEANING

Removing & Installing scrapers

Quick Tips & Troubleshooting

Somerset CDR-2000 Specifications

General

Roller Length	20 inches
Material	Stainless Steel
Model	CDR-2000
Manufacturer	Somerset
Power	110V, 60Hz