Quick Tips & Troubleshooting
Never use the emergency stop as an on and off switch. The emergency stop is to be
used only in emergency situations.
Clean the rolls with a dry cloth. (NEVER USE WATER)
Install the scrapers in the opposite order of their removal.
Close the safety cover and secure it with the 2 thumb screws.
Turn the power ON, and the machine is ready to use.
If the machine does not start:
1. Check if the AC Power is available
2. Is the plug connected?
3. Make sure the cover is down securely
4. All scrapers are installed properly
If rolls ever start to squeal due to dryness, remove and clean the scraper blades thoroughly
and rub the beveled edge with cooking oil, like vegetable or canola. This technique will
remove the squealing sound you get from friction between the roller and the dry scraper.
!! CAUTION !!
THIS MACHINE IS MAINTENANCE FREE.
NEVER USE OIL OR GREASE ON ANY OF THE MECHANICAL PARTS OF
THE MACHINE.
ALL MECHANICAL PARTS ARE PERMANENT SELF LUBRICATED.
To Next Page
Loading...
