To Next PageTo Next Page
Need help?Do you have a question about the SOMFY Axorn 50 and is the answer not in the manual?
General| Max. gate leaf weight | 300 kg |
|---|---|
| Power supply | 230 V AC |
| Motor voltage | 24 V DC |
| Motor Type | Electromechanical |
| Operating Temperature Range | -20°C to +60°C |
| Protection Rating | IP44 |
| Max. gate leaf length | 5 m |
| Max. angle | 120 degrees |
| Control Options | Remote control |
Assemble the lintel attachment lug 50mm above the highest door point, centered relative to the door.
Verify factory pre-set chain tension and ensure rails join correctly using the center marking.
Move the trolley towards the handle using the specified method as part of the adjustment process.
The adjustment indicator is illuminated when the AXORN unit is powered on.
Follow sequence: lock handle, press adjustment button, press speed button, then press adjustment button again.
Press and hold remote button, then briefly press adjustment button to memorize remote control buttons.
The garage door must be closed to successfully perform the self-learning function.
Choose fast speed for sectional doors or slow speed for overhanging doors during self-learning.
Press adjustment button, then use remote to memorize open and close travel limits for the door.
Hold adjustment and speed buttons simultaneously for over 3 seconds to erase all memorized remote controls.
Ensure the memorizing remote control button matches the motor control button for other remote units.
