SOMFY FREEVIA Series User Manual

www.somfy.com
FREEVIA LINE
FR
Manuel d’installation et d’utilisation
EN
Operating and installation guide
DE
Montage- und Gebrauchsanleitung
NL
Gids voor de installatie en het gebruik
PL
Instrukcja montażu i obsługi
5149576A

SOMFY FREEVIA Series Specifications

General

Motor Voltage	24 V DC
Protection Rating	IP44
Motor Type	Electromechanical
Power Supply	230V AC
Opening time	15 seconds
Technology	Radio-controlled
Control Options	Remote control, keypad

Summary

Prerequisites for installation

Stop blocks on the ground

Positioning the motor

Electrical pre-equipment

Cables required

Concrete base

Tools require for installation (not provided)

Screws etc. required for installation of the rack and pinion (not provided)

Installation

1.1 Unlock the motor

Procedure to release the motor's pinion for installation.

1.2 Installing the motor

Steps for physically mounting the motor unit.

1.3 Checking the installation of the motor

Verification steps to ensure correct motor mounting.

1.4 Locking the motor

Securing the motor handle after installation.

1.5 Wiring the motor

Connecting electrical wires to the motor terminals.

1.6 Connecting to the 230V power supply

Steps for connecting the main power source.

1.7 Earthing the control electronics

Procedure for grounding the control electronics unit.

Commissioning and standard use

2.1 Switching the installation on

Initial power-up and system readiness check.

2.2 Gate travel self-learning

Automatic programming of gate open/close limits.

2.6 Fully opening and closing the gate

2.7 Obstacle detection

Explanation of the safety feature that stops/reverses the gate.

Advanced parameter settings

4.1 Pedestrian opening

4.2 Automatic closing

4.3 Gate speed

Programming the remote controls

5.1 Presenting the remote controls

Possibilities for programming the 2-button remote control

Possibilities for programming the 4-button remote control

5.2 Adding a remote control

Procedure for pairing new remote controls.

5.3 Deleting a remote control

Procedure for removing paired remote controls.

Repairs

6.3 Clear the settings

How to reset the system settings and remote controls.

6.4 Diagnostics

Troubleshooting guide based on indicator light flashes.