SOMFY J4 1TN User Manual

1
© 2011 Somfy SAS. All rights reserved. 09/2011
DE
www.somfy.com
Motore J4 per veneziane da esterno
Ref. 5055337C
J4
1TN / 2TN
J4
HTM
J4
WT
Antrieb J4 für Außenjalousie / Raffstore
J4 motor for exterior Venetian Blinds
Moteur J4 pour brise soleil orientable
3RKRQ-SURYHQNRYQtåDOX]LH
Notice dinstallation
1iYRGNSRXåLWt
Guida all'installazione
Installation Guide
Gebrauchsanleitung
CZ IT EN
DE
FR
l5:$g&>m

SOMFY J4 1TN Specifications

General

Brand	SOMFY
Model	J4 1TN
Category	Engine
Language	English

Summary

General Information and Safety

General Safety Instructions

Important safety instructions for installation and use to prevent injury.

Declaration of Conformity

Somfy's declaration of device compliance with applicable directives.

Mushrooms: Function and Options

Component ensuring safety and used for upper end limit adjustment with various options.

Technical Data and Specifications

Key specifications including torque, limit switch capacity, thermal limits, motor angle, and rotation direction.

Assembly Instructions

58x51mm or 58x56mm Head Rail Assembly

Instructions for assembling the J4 motor into 58x51mm or 58x56mm head rails.

58x56mm Head Rail Assembly

Instructions for assembling the J4 motor into 58x56mm head rails with external clips.

57x51mm Head Rail Assembly with External Clips

Steps for attaching the motor using external clips in a 57x51mm head rail.

57x51mm Head Rail Assembly with Internal Clips

Steps for attaching the motor using internal clips in a 57x51mm head rail.

Head Rail Assembly for Larger Profiles

78x67mm Head Rail Assembly (J406/J410)

Assembly instructions for J406/J410 motors in 78x67mm head rails.

78x67mm Head Rail Assembly (J418)

Assembly instructions for J418 motors in 78x67mm head rails, including bracket.

Electrical Connection and Limit Setting

Electrical Connection Guide

Wiring instructions for J4 1TN/HTM/WT and J4 2TN motors.

Setting End Limits for 1TN/2TN Motors

Procedure for setting upper and lower end limit positions for 1TN and 2TN motors.

Motor Limit Setting Procedures

Setting End Limits for HTM Motors

Detailed steps for setting upper and lower end limits for HTM motors.

Testing HTM Motor End Limits

Procedure to test the correct setting of upper and lower end limits for HTM motors.

WT Motor Limit Setting and Troubleshooting

Switching to End Limit Setting Mode (WT)

Instructions for entering the end limit setting mode for WT motors.

Setting Upper End Limit (WT)

Procedure to set the upper end limit position for WT motors.

Setting Lower End Limit (WT)

Procedure to set the lower end limit position for WT motors.

Troubleshooting Motor Operation

Common issues and checks for when the motor does not operate.