Need help?Do you have a question about the SOMFY LT50 RS485 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Protection Index | IP44 |
| Operating Temperature | -20°C to +60°C |
| Technology | RS485 |
| Speed | 17 rpm |
Details the intended uses and applications for the LT50 drive, excluding specific types.
Outlines responsibilities and limitations of use for the LT50 drive, including warranty invalidation.
Step-by-step guide for installing the LT50 drive, covering preparation of drive and tube.
Details on assembling the drive into the roller tube and securing it.
Essential guidelines for connecting the LT50 drive's power cables safely.
Specific pin assignments for RJ9/RJ45 data cables, with and without power output.
Instructions for setting up the motor using the RS485 SETTING TOOL.
Provides common installation questions, possible causes, and solutions for issues.
Guidance on controlling the motor via the connected control system.
Addresses common operational issues like non-response and thermal protection.
Process for discovering the motor node and selecting preset positions (1-16).
To Next Page