Need help?Do you have a question about the SOMFY LT50 and is the answer not in the manual?
Details the mechanical sequence of operation: motor drives wheel, wheel drives tube, tube drives crown, and crown drives limit switch.
Specifications for the LS40 motor, including power cable, voltage, current consumption, and cable size.
Specifications for the LT50 motor, including power cable, voltage, current consumption, and cable size.
Specifications for the ILT motor, including power and data cables, voltage, current, and cable size.
Specifications for the Altus 40 motor, including power cable, voltage, current consumption, and cable size.
Specifications for the Altus 50 motor, including power cable, voltage, current consumption, and cable size.
Specifications for Concept 25 motors, including voltage, current consumption, and cable size.
Guidance on wiring, earth connection, wire sizing, climatic conditions, and using recommended controls.
Addresses the problem and solution of wiring one motor to multiple switches without electronic control.
Explains the issue and solution for wiring multiple motors in parallel, preventing motor burnout.
Details the CD4 controller for BMS integration, its features, interlocks, and dimensions.
Introduces Moduline controllers (ML9000, ML8000, ML8100) for BMS integration, including their functions and dimensions.
Details the Animeo IB+ AC controller for BMS integration, its features, group control, and dimensions.
Explains the phone plug connector for ILT motors in BMS integration, detailing its functions and dimensions.
Describes the single-channel Busline Transmitter for Altus motors in BMS integration, its features and dimensions.
Details the five-channel Busline Transmitter for Altus motors in BMS integration, its features and dimensions.
Explains the IRS 300 for Concept 25 BMS integration, its voltage, switching, and dimensions.
To Next Page
General