SOMFY LT50 - BMS Integration with LS40 or LT50 (Continued); Option 2: Moduline Controllers

Motorisation of Window Coverings
using Somfy Motors
Integration to BMS using LS40 or LT50
Option 2
Moduline Controllers
•
DIN rail mounted controllers
• Requires 240 V power supply
• Dry contact impulse switching (impulse contact closure of 1 second minimum)
• Contact between common and up or common and down to activate motor
• Simultaneous contact between a common up and down to create a stop
ML9000 Power supply and master controller
• Can control up to 16 individual motor controllers
•
Dimensions: 85 (h) x 70 (w) x 62 (d) – 4 DIN rail slots
ML8000 Individual motor controller
• Control of 1 motor via dry contact impulse switching
•
Receives power from a ML9000
• Dimensions: 85 (h) x 35 (w) x 62 (d) – 2 DIN rail slots
ML8100 Individual Venetian motor controller
•
Control of 1 motor with tilt functionality via dry contact impulse switching
• Receives power from a ML9000
•
Dimensions: 85 (h) x 35 (w) x 62 (d) – 2 DIN rail slots