Need help?Do you have a question about the SOMFY Sonesse 40 RS485 and is the answer not in the manual?
General| Voltage | 24 VDC |
|---|---|
| Supply Voltage | 24 VDC |
| Power Supply | 24 VDC |
| Protection Class | IP44 |
| Control Interface | RS485 |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -30°C to +70°C |
| Technology | RS485 |
| Motor Type | DC motor |
Explains DANGER, WARNING, PRECAUTION, and CAUTION symbols for user safety.
Specifies the intended use of Sonesse 40 drives for interior blinds, excluding pantographs.
Details installer responsibilities and Somfy's warranty voidance for improper installation.
Covers head cover replacement, drive preparation, and fitting accessories like crown and wheel.
Instructions on cutting and preparing the winding tube, including deburring and notching.
Guides on sliding the drive into the tube and securing the wheel with screws or rivets.
Steps for mounting the drive-tube assembly onto the end and drive brackets securely.
Details power and data cable connections, including specific pin assignments and precautions.
Explains setting drive profiles (Roller/Venetian) and using setting tools like RS485 SETTING TOOL.
Provides solutions for common installation issues like product not working or being noisy.
Refers users to control point installation instructions for operating the drive.
Outlines functions of the PROG button for user mode, network ID, and factory reset.
Explains LED indicators for power status, validation, bus communication, and errors.
Offers troubleshooting steps for when the motorized product does not work, suggesting thermal protection checks.
To Next Page