To Next PageTo Next Page
Need help?Do you have a question about the SOMFY Oximo 50 S Auto io and is the answer not in the manual?
General| Technology | io-homecontrol |
|---|---|
| Torque | 50 Nm |
| Type | Motor |
| Category | Motor |
| Power supply | 230 V |
Explains the io-homecontrol® wireless communication protocol and its benefits.
Outlines installer and user responsibilities and compliance with regulations.
Provides essential safety instructions to follow and keep.
Specific safety warnings for handling and installing the Oximo io Module.
Specific safety warnings for handling and installing the Tubular S Module.
Provides safety recommendations for particular components or situations.
Safety checks for the roller shutter and its fittings before installation.
Safety recommendations for roller shutter locks and rigid links.
Step-by-step guide for attaching the Oximo io Module to the head rail.
Instructions for preparing the Tubular S Module for assembly.
Steps for preparing the roller tube, including cutting and notching.
Guide to assembling the Tubular S Module with the roller tube.
Instructions for installing the assembled motor and tube into the bracket.
Procedure to check existing settings before proceeding with commissioning.
Steps to initially program a Somfy io local control point into the motor.
How to verify and adjust the motor's direction of rotation.
Steps to confirm the automatic setup of the motor.
Basic functions and typical use of the Oximo 50 S Auto io motor.
Explanation of the default favorite position and its activation.
Instructions on how to activate the pre-programmed favorite position.
How to stop the roller shutter's movement using the control point.
How to use the buttons to raise or lower the roller shutter completely.
Describes the automatic obstacle detection feature for safety.
Explains the anti-freeze protection function to prevent damage.
Guidance for operating the motor with an io sun sensor.
Settings related to the favorite position, including modification and deletion.
Step-by-step instructions to change the favorite position.
Instructions on how to remove the favorite position.
Procedures for managing Somfy io control points and sensors.
How to change the motor's direction of rotation using a control point.
Provides solutions for common operational problems encountered with the motor.
Guidance on how to replace a lost or damaged Somfy io control point.
Steps to reset the motor to its factory default settings.
