SOMFY Tilt Only 50 WF RTS

Questions and Answers

J
Jill DawsonAug 11, 2025
What to do if SOMFY Tilt Only 50 WF RTS Engine shade will only move while I hold a direction?
- R
  Rachel LeeAug 11, 2025
  If your SOMFY Engine shade only moves while you hold a direction, it could be due to a few reasons. If you were adjusting a limit from user mode, you need to confirm your new limits by moving the shade to where you want the new limit and then press and HOLD the MY button for a jog. Another possibility is that the motor is still in programming mode, in which case you should go back to step [3] under Programming. If neither of those options work, reset the motor and start over by going to step [9] Erasing Motor Settings.
G
George DiazAug 17, 2025
Why is my SOMFY Tilt Only 50 WF RTS Engine shade skipping or clicking while it travels?
- I
  Isaac LynchAug 17, 2025
  If your SOMFY Engine shade is skipping or clicking while it travels, there are a few potential causes. It could be that the motor drive is not put into the tube correctly, so remove the motor and ensure the drive is in the correct orientation. Another cause could be that the shade is too tight in the brackets, so make sure you have a free gap on the idler end. Also, you might need a new crown/drive kit.
M
Michele WellsAug 23, 2025
How to fix SOMFY Engine when motor keeps losing its limits?
- N
  Nicole AguilarAug 23, 2025
  If your SOMFY Engine motor keeps losing its limits, it's possible that the motor was not finalized during the programming process. To resolve this, completely reset the motor by going to Erasing Motor Settings step [9].
Y
ysilvaAug 29, 2025
How to stop SOMFY Tilt Only 50 WF RTS shade from making a vibrating sound?
- D
  Dakota MuellerAug 29, 2025
  To stop your SOMFY Engine shade from making a vibrating sound, you need to adjust or shim your installation brackets for the shade.
M
Mary LambSep 4, 2025
What to do if SOMFY Tilt Only 50 WF RTS Engine shade squeaks while it travels?
- D
  derrick80Sep 4, 2025
  If your SOMFY Engine shade squeaks while it travels, lubricate the idler end plug.