Need help?Do you have a question about the SOMFY Sonesse 30 RS485 and is the answer not in the manual?
General| Power Supply | 12V DC |
|---|---|
| Communication Protocol | RS485 |
| IP Rating | IP30 |
| Category | Engine |
| Technology | Wired |
| Sound Level | 38 dBA |
Lists compatible blinds and control systems for the Somfy RS485 motor.
Provides essential safety guidelines for the installation and use of the motor.
Steps for preparing the motor, including fitting the crown and drive wheel.
Instructions for cutting and preparing the tube for motor installation.
Guidance on sliding the motor into the tube and fixing it securely.
Steps for mounting the assembled motorized tube onto the end and motor brackets.
Details on connecting control devices like Setting Tool, Centralis IB, and Wall Switch.
Information regarding the correspondence between control inputs and functions.
Commissioning steps specific to the RS485 communication protocol.
Commissioning procedures for dry contact inputs.
Procedure to verify and correct the motor's rotation direction.
Guide on setting the upper and lower travel limits for the motor.
Instructions for setting, changing, and deleting the preferred 'MY' position.
Detailed steps for re-adjusting the upper travel limit of the motor.
Detailed steps for re-adjusting the lower travel limit of the motor.
Common issues and checks when the motor fails to operate.
Troubleshooting steps for premature stopping of the motor or equipment.
Overview of functions available for product configuration via network messages.
Overview of functions used to change the product's operational status.
Functions for retrieving status information from the product.
Functions for sending status information from the product.
To Next Page
