Need help?Do you have a question about the SOMFY ilmo 50 WT and is the answer not in the manual?
Defines the intended use and conditions for the ilmo 50 WT drive.
Outlines installer and user responsibilities and warranty conditions.
General instructions for installing the drive and checking shutter strength.
Steps to fit accessories onto the drive and measure length.
Instructions for preparing the roller tube, including cutting and notching.
Steps for assembling the drive and tube, including fixing the drive wheel.
How to mount the tube/drive assembly onto brackets.
Instructions and diagram for electrical connection of the drive.
Procedure for checking and setting the roller shutter direction.
Advice and troubleshooting tips for the installation process.
Table of common installation problems, causes, and solutions.
Procedures for resetting the drive to factory settings.
Steps to restore the drive to factory settings using a control point.
Steps to restore the drive to factory settings using the setting tool.
Instructions for operating the roller shutter using the control buttons.
Explanation of the automatic obstacle detection function and how to clear obstacles.
Explanation of the anti-freeze protection function.
Table of common problems and solutions for use.
To Next Page
General