103
CONTENTS
WELCOME 2
1. SAFETY 3
2. NINA TIMER IO REMOTE CONTROL 5
3. USING NINA TIMER IO 16
Control an item of equipment 16
My function 18
Natural Control function 22
Launch a scenario 27
Sunlight Function 28
Alarm function 32
Timer function 34
Create typical days 39
Program the week 57
View programmed actions 60
4. CUSTOMIZING NINA TIMER IO 68
Customize items of equipment 68
Customize groups 72
Customize scenarios 78
Define timer settings 83
Customize remote control 88
5. ADVANCED SETTINGS 94
6. TROUBLESHOOTING 107
7. ABOUT NINA TIMER IO 108
Copyright © 2017 - 2021 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
Upgrading an installation already equipped with Nina Timer io
Pair equipment
There are 4 possibilities to pair equipment:
Transfer
To transfer items of equipment to a control point:
to a remote control with feedback
to a remote control without feedback
Retrieve
To retrieve items of equipment from a control point and place them in groups/
rooms
See Place equipment in groups/rooms, page 98.
Discover
To discover all equipment with the same key or items of equipment without
control points and place them in groups/rooms.
See Place equipment in groups/rooms, page 98.
Discover
sensors
To discover all new sensors or existing sensors with the same key.
Refer to Pair sensors, page 99
All the equipment transferred to another control point remain saved in Nina Timer io.
A remote control without feedback function (1W) does not indicate when the transfer is finished: to
confirm that the item of equipment has been transferred successfully, all the products make a back-
and-forth movement.
The number of items of equipment on Nina Timer io is limited to 60 products. A warning pop up
window is displayed when the 40, 50 and 60 equipment steps are reached.
Only already settled equipment can be paired with Nina Timer io.
Pair equipment 103
Manage the io system 104
Manage equipment 105
Reset to factory settings 106
To Next Page
Loading...
Need help?
General
