SOMFY Nina Timer io User Manual

99
CONTENTS
WELCOME 2
1. SAFETY 3
2. NINA TIMER IO REMOTE CONTROL 5
3. USING NINA TIMER IO 16
Control an item of equipment 16
My function 18
Natural Control function 22
Launch a scenario 27
Sunlight Function 28
Alarm function 32
Timer function 34
Create typical days 39
Program the week 57
View programmed actions 60
4. CUSTOMIZING NINA TIMER IO 68
Customize items of equipment 68
Customize groups 72
Customize scenarios 78
Define timer settings 83
Customize remote control 88
5. ADVANCED SETTINGS 94
6. TROUBLESHOOTING 107
7. ABOUT NINA TIMER IO 108
Copyright © 2017 - 2021 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
First installation of Nina Timer io
Pair sensors
1. Select the Sensors button (if the installation
contains compatible sensors).
2. If there are already two sensors stored in Nina
Timer io, the memory is full and a sensor must be
removed to store another one. Click on OK.
3. If there are fewer than two sensors stored
in Nina Timer io, the following screen is
displayed: press the "PROG" button for
2 seconds. Then click on OK to confirm.
> Only one sensor can be discovered at a time.
> To find the "PROG" button of the sensor, please
read the manual.
4. Click on "Restart" if the following screens are
displayed:
> No sensor detected.
> Several sensors stimulated.
5. If a sensor has been detected, a "Sensor" group is
automatically created.
6. Associate the equipment that will react depending
on the sunlight intensity:
> A threshold and two scenarios are predefined
by default for each sensor.
To customise each sensor (threshold, scenarios,
associated equipment),
see Sunlight Function, page 28.
Do you want to
discover other
equipment
or sensors?
Sensors
Equipment
End installation
PAIRING
1. Presson the
"PROG" button
of the sensor
for 2 sec.
2. Then click on "OK".
Only one sensor can
be discovered at a time.
OK
PAIRING
WARNING
You have reached
the memory limit of
two sensors.
To store a new sensor,
delete one of the
sensors already stored.
OK
PAIRING
Cancel
Restart
No sensor identied:
- Out of radio range
- Sensor is o
PAIRING
1
2
4
3
Cancel
Restart
Several sensors
have been stimulated.
PAIRING
This can take
a few minutes…
Searching for sensor…
PAIRING
One sensor detected.
A sensor group
will be created.
You need to
associate
equipments
you want to
manage with
the sun function.
OK
PAIRING
SENSOR
Delete
Sun 1
Place equipment
in the sensor group.
.......................................................................................
.......................................................................................
OK
1/1
Awning 1
5
6
Start Nina Timer io 95
Pair equipment 96
Place equipment in groups/rooms 98
Pair sensors 99
Complete installation 100

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English