+
-
9.6 VDC 16.8 VDC
Red
Black
PREPROGRAMMING A CONTROL POINT DIRECTION OF ROTATION
END LIMITS SETTING
AUTOMATIC MODE MANUAL MODE SEMI AUTOMATIC MODE
Roller shutter with rigid links and
with stops
Roller shutter without rigid links
and without stops
Control point is temporary
programmed for 10 minutes
Roller shutter without rigid links
and with stops
Roller with rigid links and without
stops
PAIRING
Control point is completely
programmed
Short installation guide
From the Application
“Help me by Somfy”
scan the QR code here
to find complete
setting instructions.
“Help me by Somfy”
available on stores
No setting to be
performed: the end limits
are set automatically.
The rotation direction of the drive self-adjusts
automatically during the first few cycles.
You can go
to the step