To Next PageTo Next Page
Need help?Do you have a question about the SOMFY Ixengo L 230V RTS and is the answer not in the manual?
General| Power Supply | 230V |
|---|---|
| Radio Frequency | RTS |
| Motor Type | Electromechanical |
| Operating Temperature Range | -20°C to +60°C |
| Protection Rating | IP44 |
| Technology | RTS |
| Brand | SOMFY |
| Model | Ixengo L 230V RTS |
| Maximum Weight Capacity | 400 kg |
| Type | Swing Gate |
Diagram showing and labeling the main physical parts of the Ixengo L 230V RTS motor.
Visual guide specifying the required dimensions and clearances for installing the Ixengo L 230V RTS.
Charts illustrating the maximum permissible gate weight based on gate length.
Table detailing how gate angle (α) affects required installation dimensions (X, B, A).
Illustrations and measurements for installing the gate motor at various specific angles.
Instructions for correctly installing the support brackets onto the gate post.
Procedure for securely attaching the motor unit and its operating arm to the gate.
Schematic and table for connecting the motors (M1, M2) and control inputs.
Steps involved in fitting the protective outer casing onto the motor unit.
Explanation of how to manually operate the gate system using the release mechanism.
