User Manual SPA Snow Pack Analyser
- 23 -
3 Snow temp. meas.
The parameter defines, if the snow temperature is measured and which input is the snow temperature.
• None = 1 (default)
• Input 1 = 2
• Input 2 = 3
• Input 3 = 4
• Input 4 = 5
• Input 5 = 6
4 Protocol output
The parameter defines, if the values of the inputs 2 to 5 are included in the protocol output.
• Excl. input 2 to 5 = 1 (default)
• Incl. input 2 to 5 = 2
5 Active sensors
The parameter describes the sensors that are measured and output.
• Sensor 1 only = 1
• Sensor 1 and 2 = 2
• Sensor 1 to 3 = 3
• Sensor 1 to 4 = 4 (default)
To Next Page
Loading...
