SOMMER TQ-S Tracer User Manual

Sommer GmbH 24
7.5. Measurement and discharge calculation
Every discharge measurement with the TQ-F system requires preparatory operations like placing
the probes in the water and preparing the tracer solution. These operations are explained in this
section of the manual.
Click on Next (F2)
In the following form descriptions of the measurement to be performed can be inputted. The input of
the amount of tracer substance ( 5.3) is mandatory. The other input fields are used for
documentation purposes only.
With Next (F2) the measured values are already displayed:
If the measurement is performed by one single operator only, recording the measured data
should be started at this point. Afterwards the prepared tracer solution is injected.

SOMMER TQ-S Tracer Specifications

General

Brand	SOMMER
Model	TQ-S Tracer
Category	Measuring Instruments
Language	English