Sommer GmbH 1
1. Introduction
The TQ-S System consists of at least one conductivity sensor and the software TQ-Commander. The TQ-
Amp is a measuring device with Bluetooth data transmission to which a conductivity probe can be
connected. It is possible to use up to four conductivity sensors at the same time when using TQ-
Commander. This software supports you in conducting a measurement and when performing post
processing of measured data. TQ-Commander is available for Microsoft Windows PCs and Laptops as
well as for Windows Mobile devices.
2. Contents of assortment
2.1. TQ-Commander Versions
o Windows 98, Windows 2000 SP4, Windows XP:
- Microsoft .net Framework 2.0 or higher
- Microsoft Installer 3.0 or higher
o Windows Vista, Windows 7, Windows 8: No additional installations required
Mobile version:
o Windows Mobile 5 to 6.5, required:
- Microsoft.net Compact-Framework 2.0 or higher
To Next Page
Loading...
Need help?
General
