Page 26 Sleep Apnea Therapy User Manual
Fitting the Transcend H6B and Transcend H9M Waterless Humidification Systems
7. Once the interface is properly fitted, slightly
tighten the top headgear straps that connect to
the CPAP so that you may lie down.
8. Make sure that the rear headband is still seated
at the nape of the neck.
9. Adjust the interface straps or mask
adjustments as necessary so the interface
creates a complete seal against the face. The
interface should feel secure while lying down,
but the CPAP will shift slightly with
movement of the head.
To Next Page
Loading...
