Sleep Apnea Therapy User Manual Page 29
Powering the CPAP
Using the Transcend P
4
Overnight Battery System or P
8
Multi-
night Battery System with the mobile power adaptor
Note If a power receptacle for the mobile power adaptor is available, use it. This will charge the battery and
allow for maximum use while traveling.
Note To charge the battery without the CPAP device attached, connect the mobile power adaptor to the battery
pack.
1. Insert the barrel plug from the mobile power adaptor into the battery.
2. Insert the barrel plug of the battery into the Transcend power jack so that the plug and cord face upward.
3. Insert the second mobile power adaptor cable into the mobile power receptacle.
To Next Page
Loading...
