SonicWALL NSA 4600 - Connecting the LAN Port; Connecting the WAN Port

28
SonicWallNSA2600/3600/4600/5600/6600GettingStartedGuide
ConnectingtheLANPort
1ConnectoneendofanEthernetcabletoyourlocal
networkswitchorothernetworkingdevice,ortoyour
computer.
2ConnecttheotherendoftheEthernetcabletotheX0
(LAN)portonyourSonicWallNSAappliance.
ConnectingtheWANPort
1 ConnectoneendofanEthernetcabletoyourInternet
connection.
Ifyouhavearouter,DSLmodem,orcablemodem,
connecttheEthernetcabletoaLANportontherouter
ormodem.
2 ConnecttheotherendoftheEthernetcabletotheX1
(WAN)portonyourSonicWallNSAappliance.

NOTE:IfX1isconfiguredinWireMode,configurea
differentinterfacewithoneoftheotherWANtypesfor
useinthisstep.