21
Getting Started
Basic Settings
Security Settings
To prevent unauthorised use of your phone, you can set a
PIN code. The PIN is operator dependent.
1 . Select Menu > Settings > Security settings > PIN
protection > On. Enter the PIN. Select OK. After
this is set, every time you power on the phone, you
will be requested to enter the PIN. If the PIN code is
wrong you cannot access the phone.
2 . To change the PIN code select Menu > Settings >
Security settings > Change PIN. You can change
codes for PIN and PIN2. Contact your service
provider for details.
Phonelock Mode
In the phonelock mode, the phone can be unlocked only
by entering a password.
To enter the phonelock password, select Menu >
Settings > Security settings > Phone lock. The
selected key is assigned with the phone lock. You can
press the key to lock the phone. Enter the password to
unlock the phone.
The default password for phonelock is 1234.
To change the safeguard or phonelock
password, select Menu > Settings >
General tab > Security settings > Change
password > Change phonelock pw /
Change safeguard pw. Enter the password.
Select OK. Enter the new password. Select
OK. Reenter the new password. Select OK.
If the phone lock is enabled, you must enter the phone
lock password, when ever the phone is powered ON.
Auto Keypad Lock
To lock the keypad, select Menu > Settings > Phone
settings > Auto keypad lock. You can choose to switch
it off by selecting None or enable the feature by setting
time.
You can also press and hold the ‘*’ to lock the keypad.
To unlock the keypad, press ‘LSK’ and then ‘*’ key.
Date and Time
To set the Date and Time, select Menu > Settings >
Phone settings > Time and date > Set time/date.
Silent Mode
In the silent mode, the alerts for Calls, Organizer, SMS,
and battery status are disabled. Select Menu > Settings
> Profiles > Silent OR press and hold the # key.
To Next Page
Loading...
Need help?
Operating Environment
Display
Battery
Camera
Ports & Interfaces
Weight and Dimensions
