SONNECT Sound bullet - Technical Specs; Typical Values and Tolerances

14
Warning: the Sound Bullet shouldn’t be used to test
party-line intercom systems.
Typical Values and Tolerances
XLR 1/4” unbal jack
Generator
1 kHz Tone (±1 dB) -40, -20, -10 dBu -40, -20, -10 dBu
Pink noise (±1 dB) -40, -20, -10 dBu -40, -20, -10 dBu
Input meter
‘SG‘ threshold
-20 dBu n/a
‘PK‘ threshold
+10 dBu n/a
Impedance
Output 350 Ω 600 Ω
Input 3 kΩ 600 Ω / 3.5 kΩ
Voltages
P48 detection
xed: 44 - 52 V
ash: 24 - 44 V
n/a
Cable-tester DC 3.3 V n/a
Technical Specs