Need help?Do you have a question about the Sonoff SNZB-02 and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Purpose | Indoor |
| Material | Polycarbonate (PC) |
| Sensor type | Temperature & humidity sensor |
| Standard interfaces | Wireless LAN |
| Connectivity technology | Wireless |
| Temperature measuring range | - °C |
| Storage temperature (T-T) | 10 - 90 °C |
| Operating temperature (T-T) | -10 - 40 °C |
| Battery type | CR2450 |
| Battery voltage | 3 V |
| Battery life (max) | 1 year(s) |
| Certification | CE, FCC, RoHS |
| Built-in display | No |
Weight and Dimensions| Depth | 14 mm |
|---|---|
| Width | 43 mm |
| Weight | 15.5 g |
Remove the battery insulation sheet to activate the device for setup.
Install the eWeLink application from your device's app store.
Guide on pairing the SNZB-02 with the ZigBee Bridge via the eWeLink app.
Place the device directly on a table or desk for operation.
Use the included adhesive to attach the device to a suitable surface.
Overview of the SNZB-02's capabilities, including low-energy and monitoring functions.
Instructions on how to remove the sub-device from the ZigBee Bridge.
To Next Page
