Need help?Do you have a question about the Sonoff SNZB-03 and is the answer not in the manual?
Instructions on downloading and installing the eWeLink mobile application for device operation.
Steps to remove the battery insulation sheet to activate the device.
Procedure for pairing the motion sensor with a ZigBee bridge via the eWeLink APP.
Overview of the SNZB-03 motion sensor's key capabilities and functions.
Guidance on positioning the device on a desktop surface.
Instructions for mounting the device using its adhesive backing.
Instructions on downloading and installing the eWeLink mobile application for device operation.
Steps to remove the battery insulation sheet to activate the device.
Procedure for pairing the motion sensor with a ZigBee bridge via the eWeLink APP.
Overview of the SNZB-03 motion sensor's key capabilities and functions.
Guidance on positioning the device on a desktop surface.
Instructions for mounting the device using its adhesive backing.
General| Type | Motion Sensor |
|---|---|
| Battery Type | CR2450 |
| Detection Angle | 110° |
| Operating Temperature | -10°C to 40°C |
| Operating Voltage | 3V |
| Wireless Protocol | Zigbee |
| Detection Range | 5 meters |
| Dimensions | 35x39x28mm |
| Operating Humidity | 10% to 90% RH |
| Battery Life | 2 Years |
| Compatibility | Compatible with Zigbee 3.0 hubs |
To Next Page
