Need help?Do you have a question about the Sonoff SNZB-04 and is the answer not in the manual?
Peel off the protective film from the 3M adhesive backing.
Align the transmitter and magnet marks for proper installation.
Mount the transmitter and magnet in the designated door/window areas.
Ensure the gap is under 15mm when the door/window is shut.
Download and install the eWeLink application from app stores.
Pair the sensor with the ZigBee Bridge via the eWeLink app.
Peel off the protective film from the 3M adhesive backing.
Align the transmitter and magnet marks for proper installation.
Mount the transmitter and magnet in the designated door/window areas.
Ensure the gap is under 15mm when the door/window is shut.
Download and install the eWeLink application from app stores.
Pair the sensor with the ZigBee Bridge via the eWeLink app.
General| Brand | Sonoff |
|---|---|
| Model | SNZB-04 |
| Category | Accessories |
| Language | English |
To Next Page
